Roll - HP 64700 Series User Manual

< ROLL>
1
Syntax
Function
Default Values
Parameters
9-76 Timing: Commands
This softkey describes how to move around the timing diagram.
none
The < ROLL> softkey reminds you that you can enter a sample
number, or use the < CTRL> -F and < CTRL> -G (or < NEXT>
and < PREV> ) keys, to roll the timing diagram. The cursor
position, as indicated to the right of the waveforms, changes
accordingly.
The timing diagram can also be scrolled up and down if the
waveform size or the number of signals displayed exceeds the size
of the screen.
none
< SAMPLE> By entering a sample number on the
command line, you reposition the cursor to
that sample number on the display.
< CTRL> -F Causes the cursor to move to the right on
the waveform (to higher samples numbers in
trace memory).
< CTRL> -G Causes the cursor to move to the left on the
waveform (to lower sample numbers in trace
memory).
< NEXT> Causes the next page of waveform data to be
displayed (higher samples numbers).
< PREV> Causes the previous page of waveform data
to be displayed (lower sample numbers).
^ Scrolls the diagram up by one line if all of
< uparrow> the displayed signals do not fit on one screen.