HP 64700 Series User Manual page 204

9-36 Timing: Commands
thru This parameter selects a range in trace
memory to search. The first point is the
cursor position. The second point is a
selected parameter.
trigger This parameter specifies that trace memory
data between the cursor and the trigger will
be searched.
mark_x This parameter specifies that trace memory
data between the cursor and mark_x will be
searched.
mark_o This parameter specifies that trace memory
data between the cursor and mark_o will be
searched.
< SAMPLE> This prompts for you to enter a sample
number. Trace memory data between the
cursor and the entered sample number will
be searched.
start This parameter specifies that trace memory
data between the start of memory and the
cursor will be searched.
end This parameter specifies that trace memory
data between the cursor and the end of
memory will be searched.
< TIME> This prompts you to enter the amount of
time a pattern should exceed (greater_than)
or not exceed (less_than).
nsec_of, These parameters specify the units of
usec_of, measurement of < TIME> in nanoseconds,
msec_of, microseconds, milliseconds, or seconds,
sec_of respectively.
trigger This option locates and displays the trigger.