Using Measurement Data In Hexadecimal; Understanding The Measurement Data Output; Standard Mode Data Format - HP 64700 Series User Manual

U sing
1
Measurement
Data in
Hexadecimal
Understanding the
Measurement Data
Output
Standard Mode Data
Format
You can store raw measurement data in a ASCII file in hexidecimal
format by using the "copy measurement_data_in_hex to < FILE> "
command. This file can be used for further analysis or comparison.
The measurement data output is a list of all the data samples in
trace memory stored from first to last. In all cases, the first data
sample in the file corresponds to the first sample in trace memory
regardless of the starting sample number. Each data sample is in
the form
BBAA
where:
BB represents data from the upper eight signals
(x_upper)
AA represents data from the lower eight signals
(x_lower).
In the standard mode, each of the data sample bits represents a
signal bit value.
Bit0 = xbit0 data
Bit1 = xbit1 data
Bit2 = xbit2 data
Bit3 = xbit3 data
Bit4 = xbit4 data
Bit5 = xbit5 data
Bit6 = xbit6 data
Bit7 = xbit7 data
Timing Diagrams and Outputs B-13