Figure 8-2. Trace List Organization; Sample Number - HP 64700 Series User Manual

sample number

Trace List
STANDARD MODE
Label: X_upper
Base: bin
-0003 __01111111
-0002 01111111
-0001 01111111
trigg_x 01111111
+0001 01111111
+0002 01111111
+0003 01111111
+0004 01111111
+0005 01111111
+0006 01111111
+0007 01111111
+0008 01111111
+0009 01111111
+0010 01111111
reference points
8-18 Timing: Using the Analyzer
mode
Timing (64700), 16 channels, 100MHz
10 nsec/sample
Runs=0
X_lower XBITS
bin bin
10111110 0111111110111110
10111110 0111111110111110
10111110 0111111110111110
10111110 0111111110111110
10111110 0111111110111110
10111111 0111111110111111
10111111 0111111110111111
10111111 0111111110111111
10111111 0111111110111111
10111111 0111111110111111
10111111 0111111110111111
10111111 0111111110111111
10111111 0111111110111111
10111111 0111111110111111
trace data

Figure 8-2. Trace List Organization

Sample Number. The relative sample number is displayed in this
column. The trigger point, labeled "trigger" is relative sample
number zero. If reference points appear at the trigger, the sample
number appears as "trigg_".
Reference Points. The reference points mark_x, mark_o, and
the four multiple occurrence points (abcd). The reference points
appear in the column immediately to the right of the sample
number. If more than one reference point is in the same location,
an "m" is used to denote multiple references.
sample period
Time x_o
Mean=0.0 nsec Stdv=0.0 nsec
time count
abs
-30.0 nsec __
-20.0 nsec
-10.0 nsec
0.0 nsec
10.0 nsec
20.0 nsec
30.0 nsec
40.0 nsec
50.0 nsec
60.0 nsec
70.0 nsec
80.0 nsec
90.0 nsec
100.0 nsec
statistical summary
6.00 usec
cursor