Table of Contents
Advertisement
Parameters
Examples
Related Commands
9-50 Timing: Commands
x1,
Choose one of these options to set the
x2,
magnification to a factor of 1, 2, 4, 10, 20, 40,
x4,
or 100, respectively. The time per division
x10,
information on the screen changes
x20,
accordingly, along with the magnification
x40,
value field. In ASCII diagrams, the time per
x100
character is indicated.
indicator
This option turns the magnify indicator on
or off. The indicator shows the area of the
display that will appear during the next x10
level of magnification. In x4 magnification,
the magnify indicator shows the area of the
display that will appear in the x40
magnification display. The indicator does
not appear for magnifications over x10.
on
This parameter turns the indicator bar on.
off
This parameter turns the indicator off.
magnify x100
CURSOR
<RETURN>
Advertisement
Table of Contents
