Table of Contents
Advertisement
d isplay
1
Syntax
Function
Default Values
Parameters
9-26 Timing: Commands
This command selects the screen to display.
The display commands moves between the three specification
screens and the two output screens. Three special function screens
can also be displayed: pod commands, error log, and event log.
Entering any of the words trace, format, pod, post, diagram, and
list will allow the commands from that specification or output
screen to be accessible. As an example, from the timing diagram
display you can change the "mode" by entering: "trace mode_is
standard".
The default screen is the trace specification.
trace_specification
This option selects the trace specification
where you can specify an event that will
Advertisement
Table of Contents
