HP 64700 Series User Manual page 198

Examples
Related Commands
9-30 Timing: Commands
which the Softkey Interface was entered. In
addition, the emulator is unlocked so that it
may be used by other users on your HP-UX
system. The information needed to continue
your session is also removed. (If you do not
release the system, no other users may access
it.)
select This measurement system option allows you
to select another module or to enter the
measurement system.
< MODNAME> This prompts you for the name of another
module in the measurement system. The
analyzer ends and the named module
immediately starts. This option will only
appear if other modules are in configured in
your Measurement System. The current
configuration is saved so that you can return
to this module later.
measurement_ This measurement system option ends the
system analyzer and enter into the measurement
system module.
end <RETURN>
end release_system <RETURN>
end select measurement_system <RETURN>
none