Appendix I. Traps And Modem Dial Out Configuration; Amcu New Screens - Coastcom D/I Mux III System User Manual

D/I Mux III User's Manual

Appendix I. Traps and Modem Dial Out Configuration

AMCU New Screens

Three new commands are now available on the AMCU. Two commands (Modify Dial Out Parameters, and View
Dial Out parameters) are for viewing and/or modifying the Modem Dialout Parameters. The other command
(Modify Alarm Trap) is used to determine what type of alarm conditions will be used to determine if a link is
down.
AMCU Main Menu
The new AMCU Main Menu with Modem Dial Out Configuration commands
08:50:32 ---------------------[ AMCU Main Menu ]---------------------- 06/11/97
LOCAL PARAMETERS
VR View Revision Levels
MT Modify Keyboard Timeout
MODEM DIALOUT CONFIGURATION
VD View Dial Out Parameters
MD Modify Dial Out Parameters
MA Modify Alarm trap
D/I Mux III User Screen
AC Access CCU User Submenu
PASSWORDS
VP View Passwords
MP Modify/Install Password
RP Remove Password
Q Quit/Disconnect
------------------------------------------------------------------------------
NETWORK PARAMETERS
VN View Network Parameters
MG Modify Default Gateway
MI Modify IP Address
MS Modify Subnet Mask
ML Modify SLIP Parameters
CODE DOWNLOAD
MC Download CCU Program
SNMP MANAGER CONFIGURATION
VM View Managers
MM Modify/Install Manager
RM Remove Manager
Figure J-1 AMCU Main Menu
286
Appendix I. Traps and Modem Dial Out Configuration