Da - Displaying Alarms - Coastcom D/I Mux III System User Manual

DA - Displaying Alarms

Enter DA to Display the T1 Alarm data (as depicted in Figure 4-10). The Card Slot column indicates
which card generated the alarm. The Alarm column indicates the type of alarm it generated. The Level
column shows Major, Minor, or Info alarms based on the severity of the alarm.
The Status column will display Active or Clear, based on the current status of the alarm. The Count
keeps track of the number of times the alarm cycled between clear and active states. (Note that the
count becomes incremental when the alarm goes to active status.)
] DA
10:48:55--------------- [ T1 Alarm Data ] ------------------03/08/95
Card Slot
------------
LIU T1-2
LIU T1-2
LIU T1-2
LIU T1-2
LIU T1-1
LIU T1-1
LIU T1-1
LIU T1-1
--------------------------------------------------------------------
Chapter 4. Configuration and Operation
Alarm
--------------
RED Alarm
CGA
CLOCK Change
RCVD Clk Loss
RED Alarm
CGA
CLOCK Change
RCVD Clk Loss
Figure 4-10. Displaying Alarm Data
Level Status
----- ------
Major Active
Info Active
Info Clear
Major Active
Major Active
Info Active
Info Clear
Major Active
112
Count
-----
2
2
1
1
2
2
1
2