Chapter 4. Configuration And Operation - Coastcom D/I Mux III System User Manual

Chapter 4. CONFIGURATION AND OPERATION

This chapter describes how to configure the D/I Mux III after the hardware has been installed. The
chapter is divided into three sections as follows:
•
The Overall System Command Organization, with figure number references, is listed in Figure 4-1.
•
The Setup and Programming Order lists the local and network commands in a functional sequence;
figure numbers are referenced for detail on the various commands.
•
A Command Index, listed alphabetically, includes actual screen, instructions as necessary, and a
discussion of commands and resulting operation.
Chapter 4. Configuration and Operation
101