Dn - Displaying The Current Working Map; Dp - Displaying System Parameters - Coastcom D/I Mux III System User Manual

DN - Displaying the Current Working Map

Enter DN to display the current working map number (Figure 4-17).
] DN
Current Working Map: 1

DP - Displaying System Parameters

Enter DP to Display system Parameters, as shown in Figure 4-18.
] DP
09:55:03--------------- [ System Parameters ]----------------- 03/08/95
System Label
System ID
Shelf Size
Comm. Mode
Comm. Data Rate
Modem Present
Port Exp. Present : NO
CGA Release Secs
DCGA Delay Secs
Jitter Atten. UI
Chapter 4. Configuration and Operation
Figure 4-17. Displaying the Current Working Map
: Day Of Week
: 0 Alarm Report Mode
: 12 Alarm Report Bell
: TERM Data Rate
: 19200 MML
: NO I960 MCU Present
Mapping Restrictions
: 5.0 REM Alarm
: 2.5 TX REM Alarm Mode
: 28 Slip Buffer
Figure 4-18. Displaying System Parameters
Jumper W1
Jumper W2
119
: Wed
: REPORTING
: OFF
: Disabled
: Disabled
: Yes
: Enabled
: Block
: FDL
: Disabled