D/I Mux III User's Manual
Group/Object Name
udpOutDatagrams
udpTable
udpEntry
udpLocalAddress
dpLocalPort
This group is provided by the DS1 MIB. See Table H-2.
snmpInPkts
snmpOutPkts
snmpInBadVersions
snmpInBadCommunityNames
snmpInBadCommunityUses
snmpInASNParseErrs
snmpInTooBigs
snmpInNoSuchNames
snmpInBadValues
snmpInReadOnlys
Table F-1. MIB-II Groups and Objects (Continued)
Transmission Group
SNMP Group
Appendix F. MIB II and DS1 MIB Group Names and Objects
Description
The total number of UDP datagrams sent from this
entity.
A table containing UDP listener information.
Information about a particular current UDP listener.
The local IP address for this UDP listener.
The local port number for this UDP listener.
The total number of Messages delivered to the
SNMP entity from the transport service.
The total number of SNMP Messages passed from
the SNMP protocol entity to the transport service.
The total number of SNMP Messages delivered to
the SNMP protocol entity, and that were for an
unsupported SNMP version.
The total number of SNMP Messages delivered to
the SNMP protocol entity which used an SNMP
community name not known to said entity.
The total number of SNMP Messages delivered to
the SNMP protocol entity that represented an SNMP
operation not allowed by the SNMP community
named in the Message.
The total number of ASN.1 or BER errors
encountered by the SNMP protocol entity when
decoding received SNMP Messages.
The total number of SNMP PDUs which were
delivered to the SNMP protocol entity, and for which
the value of the error-status field is 'tooBig'.
The total number of SNMP PDUs delivered to the
SNMP protocol entity, and for which the value of the
error-status field is 'noSuchName'.
The total number of SNMP PDUs delivered to the
SNMP protocol entity, and for which the value of the
error-status field is 'badValue'.
The total number valid SNMP PDUs delivered to the
SNMP protocol entity, and for which the value of the
error-status field is 'readOnly'.
235
Need help?
Do you have a question about the D/I Mux III System and is the answer not in the manual?