Safety Rules And Function; Special Hints For The Reader; Scope Of Application; Table Of Contents - Hofmann geodyna 2600 Operation Manual

Contents • Safety rules and function
2
Contents

1. Safety rules and function

2. Installation of the machine
3. Electrical connection
4. Controls and displays
5. Turning on the machine
6. Clamping the wheel
7. Entry of balancing mode and wheel size
8. Balancing the wheel
9. Hidden spoke placement
10. Changing modes of operation
11. Error codes
12. Pro-Match / weight minimisation
13. User calibration
14. Maintenance
15. Technical data
16. Electrical diagram
1. Safety rules and function

1.1 Special hints for the reader

A few special features were used in this manual to facilitate
reading and understanding of pictures and written instructions:
• signals the operator where to act.
Safety rules are highlighted in grey.
Arrow showing where to look

1.2 Scope of application

The off-the-vehicle wheel balancer is designed for static and/
or dynamic balancing of car and light-truck wheels weighing
up to 150 lbs and having an overall diameter of 44".
In addition to conventional balancing operations, irregular run-
ning conditions of the wheel caused by geometric deforma-
tions of the rims and/or tires, hence unsmooth ride, can be
identified, improved or, if possible, even eliminated. By exact
adjustment of the two wheel components relative to each
other optimum wheel running conditions or at least balance
weight minimisation can be achieved.
Operation manual geodyna 2600 EEWB703D
Page
2
5
6
7
13
15
17
27
31
33
40
46
57
58
58
59