Reading Op.7; Reading Op.8 Comes Up - Hofmann geodyna 2600 Operation Manual

START
119
Pro-Match/Weight minimisation
Reading OP.7 - === (Fig. 119)
Recommendation to readjust tire on the rim (the right display
segments light up permanently).
Choice 1: Readjust tire on the rim (standard program)
• Index the wheel following the right direction indicator
and provide a double mark on right side of the tire at
12:00 o'clock.
• Remove the wheel from the machine.
• Readjust the tire on the rim until the double mark coin-
cides with the valve.
• Clamp the tire/rim assembly on the balancer and readjust
at 12:00 o'clock.
• Press the PRO MATCH key to enter the valve position.

Reading OP.8 comes up.

• Press the START key (check run).
If the Pro-Match run has been carried out correctly following
the above sequence of operations, the balancer will return to
the balancing mode selected before Pro-Match and read out
the dynamic unbalance still left in the wheel (Fig. 119).
• Balance the wheel according to the readings.
Reading of error code E9
If E9 is read out, at least one error was made with respect to
the sequence of operations when performing Pro-Match (see
§ 11. Error codes). Abort the Pro-Match program by pressing
the STOP key and, if desired, start Pro-Match once again.
Choice 2
• Press the STOP key to return from the Pro-Match to the
balancing program.
The unbalance present in the wheel is read out.
• Balance the wheel according to the readings.
Operation manual geodyna 2600 EEWB703D
51