Gauge Arm Defective - Hofmann geodyna 2600 Operation Manual

Error codes
92
93
94
95
42
E83 - Fig. 92
During a measuring run the measured data have been unus-
able because of the effect of outside vibrations.
• Make sure the machine is on a solid floor and repeat the
measuring run again.
E88 - Fig. 93
The rotating speed of the main shaft exceeds the limit.
E89 - Fig. 94
A key is stuck at power-on.
• Find and release the key, or call service.
E92 - Fig. 95

Gauge arm defective.

• Call service.
• As long as the gauge arm is defective, enter by press-
ing the distance key and rotating the wheel (§ 7.2.3).
Operation manual geodyna 2600 EEWB703D