Code C0; Code C1; Code C2 - Hofmann geodyna 2600 Operation Manual

Changing modes of operation
Input: Code/state
65
-
to 1
-
to 0
-
to 1
66
-
to 2
-
to 0
-
to 1
67
34
Display: Code/state
C 1
C 1 0
C 1
1
C 2
C 2 0
C 2
1

Code C0

Fig. 65 Setting the factory-adjusted modes of operation
(see § 5.)
CLEAR (key pressed briefly): Setting the factory adjusted
modes of operation. All settings are deleted and the
display returns to standard.
RESTORE (key pressed for 3 seconds): Restores all modes
the way they were before clear was pressed (provided
they were stored previously).

Code C1

Fig. 66 Selecting the resolution of unbalance readings in 1 or
5 g, or 0.05 or 0.25 oz increments
0* = 5 g (0.25 oz) increments 1
= 1 g (0.05 oz) increments
The selected mode of operation can be transferred to the
permanent memory.

Code C2

Fig. 67 Selecting suppression of minor unbalance readings
0 = Suppression off 1*
= Suppression on
The selected mode of operation can be transferred to the
permanent memory.
* = Factory adjusted mode
Operation manual geodyna 2600 EEWB703D