Determination And Input Of Rim Width - Hofmann geodyna 2600 Operation Manual

1
.*
ALU
34
35
Entry of balancing mode and wheel size
7.2 Input of wheel dimensions for the standard
balancing mode
+
If several wheels with identical wheel size are balanced in suc-
cession, it is only necessary to enter the data for the first wheel.
It will remain stored until new entries are made.

7.2.1 Determination and input of rim width

Use the optional rim width callipers (Fig. 35).
Fig. 34 Input of rim width
• To enter the rim width, press and hold the function key
(Fig. 34, item 1).
• Rotate the wheel while the key is pressed in order to
set the value for the rim width on the display, and then
release the key.
Operation manual geodyna 2600 EEWB703D
19