Code C21 - Hofmann geodyna 2600 Operation Manual

Input: Code/state
- +
79
- +
to 28
- +
-
to 1
80
Display: Code/state
C21
1 22
2 600
XXX XXX
C28
810
300
4
7
C28
1
Changing modes of operation

Code C21

Fig. 79 Display of spell program version and model number
Example: Spell program version 1.22 for 2600
• Release CODE key to display program version.
• Press on FINE key to display model number.
Code C28
Fig. 80 Select one of the 10 stored error codes and clear the
error memory
The last 10 different error codes are written to the error
memory so that they can be called up and reported by the
operator of the wheel balancer, e.g. for remote diagnosis of
malfunctions. The most recent error code is written to memory
location 1 and the previous error codes are shifted to the
higher memory locations.
• Select one of the 10 malfunction code messages.
• Press the PRO MATCH key to display the memory
location (left) and number of incidents (right), e.g. error
code on memory location 7 occurred 4 times
• Press the CODE key for the 2nd step.
• Press and hold FINE key and rotate the wheel to set
the desired state:
0 = Do not clear the error memory
1 = Clear error memory
Operation manual geodyna 2600 EEWB703D
39