Display Panel - Central Section; Valve Stems; Sape Symbol - Hofmann geodyna 2600 Operation Manual

1
6
ALU
5
4
1
14
Fig.14 Display panel - central section
1 Measuring run indicators flash alter-
nately in top and bottom panel
- during measurement after pressing the START key
- during PRO MATCH
2 Possible weight fitting positions LEDs change with
successive pushs of the ALU key.

3 Valve stems

- Top valve stem flashes during PRO MATCH when
valve must be positioned perpendicular to the main
shaft.
- After the valve has been placed perpendicular to the
main shaft and the PRO MATCH key is pressed, the
2
LED is turned off.

4 SAPE symbol

- As the distance lever is moved the first bar and
ually the remaining bar segments light up.
3
the correction position, the segment furthest
right lights up and the speaker beeps.
- The symbol lights up when the weight fitting position is
first entered and later relocated.
Note
When the wheel is rotated manually, the SAPE symbol will not
light up.
5 ALU+ lights whenever ALU+ is
chosen.
6 OK
lights whenever in two-plane mode both imbalance
readouts are 0.00.
Operation manual geodyna 2600 EEWB703D
Controls and displays
grad-
reaching
to the
11