Error Codes - Hofmann geodyna 2600 Operation Manual

Error codes

81
82
83
84
85
86
87
40
11. Error codes
Errors in operation
Warnings
Fatal error code
E1 - Fig. 81
Rim dimensions were entered incorrectly, or incompletely.
• When the error code is read out, enter data once again.
E2 - Fig. 82
Wheel guard is not closed.
E3 - Fig. 83
Gauge arm for distance and rim diameter is not in home
position.
E5 - Fig. 84
Range of electrical compensation exceeded
(wheel adapter has unacceptable unbalance).
• Press STOP key.
• Check wheel adapter, repeat compensation run.
E6 - Fig. 85
The calibration weight was not attached for readjustment.
• Press STOP key.
• Repeat readjustment.
E7 - Fig. 86
With this wheel type it is not possible to choose a balancing
mode.
E8 - Fig. 87
Valve position was not entered (error code only in Pro-Match
program).
• Position valve at 12:00 o'clock and press the PRO
MATCH key.
Operation manual geodyna 2600 EEWB703D
- Error code E
- Error code H
- 300 or C10