Hofmann geodyna 2600 Operation Manual page 30

Balancing the wheel
54.1
54.2
54.3
54.4
54
30
Recommendations for fitting balance weights for static
unbalance correction
• With large static unbalance (e.g. 1 ounce) divide the
unbalance into two equal parts (Fig. 54.1).
• With small static unbalance fit the balance weight
either in the outer or inner correction plane (Fig. 54.2
and 54.3).
Note
Figures 54.1 - 54.3 illustrate how hammer-on weights can be
fitted. When adhesive weights are used, or both types are
mixed:
• For balancing modes Alu 2 and Alu 3 fit a balance
weight in hidden position inside the rim; in this case the
correction diameter for static unbalance correction lies
inside the rim (Fig. 54.4).
Operation manual geodyna 2600 EEWB703D