Lock - Interactive Technologies CueServer 2 User Manual

Interactive Technologies, Inc.

Lock

Syntax
Command Description
Locks the selected object(s) The number of objects locked
Lock
Abbreviation
None
Description
The Lock command locks the currently selected object(s). The Lock command can be used with Buttons,
Contacts, and Stations. When an object is locked, it does not trigger its events when operated and if it has
an indicator, it appears in the "locked" state. Unlock has the opposite effect as Lock.
The following table shows the various effect of locking or unlocking an object:
Object When Unlocked
Responds to presses normally, displays normal
Buttons
indicator states
Contacts Responds to closures normally
Station operates normally, all controls display
Stations
normal indicator states
*
Disabling or Locking a Button, Contact or Station both prevent events from being triggered when physically
operated, however a Disabled Button, Contact or Station still shows its normal indicator states, where a
Locked object shows its Locked indicator state.
Examples
Button 1 Lock
Locks button 1.
Return Value
CueServer 2 User's Manual - 18.5.18
When Locked
Does not trigger any actions, displays locked
indicator state
Does not trigger any actions
Station is locked, all controls display locked
indicator states
Page 206 of 429