Interactive Technologies CueServer 2 User Manual page 368

Interactive Technologies, Inc.
• Groups
◦ Hovering over the Channels column in the Group List now reveals a popup window that
Feature
lists all of the channels in the group.
◦ Deleting all of the text from the Channels field is now possible.
Bug
• Zones
◦ Fixed a crash that could occur if the Zones panel is closed while it is still fetching the zone
Bug
list from the show file.
• Rules
◦ Fixed a firmware crash that would occur if a SET rule is created and then saved without
Bug
specifying an action.
◦ Some Preset Actions were failing to execute if assigned to the highest numbered button on
Bug
a station.
◦ Popup buttons in rules are now visible on lines with long CueScript.
Bug
◦ Rule actions within Cues and Presets did not have the proper default Playback Fader.
Bug
• Settings
◦ A new Timecode panel in General settings allows external SMPTE Timecode audio
Feature
input processing to be enabled or disabled, and also to set a threshold for jumping over or fast-
forwarding through discontinuous time periods.
◦ Fixed a problem that could cause show file corruption after increasing the number of
Bug
Playbacks in the Settings > DMX > Resources panel.
• Status
◦ A new Timecode panel in the System Status area displays the live timecode along with
Feature
internal generation and external input indicators. The current dBFS scale of the audio input is
displayed as well.
• Audio
◦ A new Audio Input processor is included that can receive and decode incoming Linear
Feature
Timecode (LTC) signals.
• CueServer Studio
◦ Restore the ability to update the firmware of a remote CueServer that was broken in
Bug
v2.0.4.
CueServer 2 User's Manual - 18.5.18
Page 366 of 429