Interactive Technologies CueServer 2 User Manual page 181

Interactive Technologies, Inc.
At
Syntax
Command
At <value>
At Cue <cue>
At Playback <playback>
At Input
At Output
At [+/-]<value>
At ?
•
<value>
◦ A percentage from
by the sign.
%
◦ A decimal number from
proceeded with a
◦ A hexadecimal number from
must be proceeded with a
◦ (Full) or
FL
◦ can be used as a shortcut that means
Off
◦ A sign or
+
•
<cue>
◦ Any whole number from
◦ May optionally contain decimal numbers from
•
<playback>
◦ Any whole number from
Description
Set the value of the selected object(s)
Sets the selected channels to the values in Cue cue
Sets the selected channels to the values in Playback
playback
Sets the selected channels to the values currently
coming from the DMX input
Sets the selected channels to the values currently
being sent to the DMX output
Set the value of the selected object(s) to an offset (or
delta) from the object(s) current value
Get the value of the selected object(s)
to 100. When specifying percentages, the value can optionally be followed
0
to #255. When specifying decimal numbers, the value must be
#0
sign.
#
$00
sign.
$
can be used as a shortcut that means
On
may appear before the value to specify an offset (or delta) from the current value.
-
to
0 99999
to
1 32
to $FF. When specifying hexadecimal numbers, the value
100%
0%
to
.00 .99
CueServer 2 User's Manual - 18.5.18
Return Value
The value the object(s)
were set to
The number of channels
set
The number of channels
set
The number of channels
set
The number of channels
set
The value the object(s)
were set to
The current value of the
selected object(s)
Page 179 of 429