Interactive Technologies CueServer 2 User Manual page 250

Interactive Technologies, Inc.
dash character before the fade time. For instance, the command
5.5 seconds before beginning a 10 second fade.
Using Both Fade Delays And Split Fade Timing
Both fade delays and split fades can be combined. For instance, the command
cause any channels fading up to be delayed 1 second before fading over 2 seconds, while the downward
fading channels would be delayed 3 seconds before fading over 4 seconds.
Determining The Current Global Fade Time
Use the Time command with the question mark (?) to return the current global fade time. A fade time such
as or will be returned.
7.21 12/3
*
Note that the Global Fade Time is different from the Cue Fade Time. The global fade time effects the At
command. The cue fade time effects the Go command. The cue fade time is set with the Fade command.
Examples
Time 1
Sets the global fade time to 1 second.
Time 1.35/7.2
Sets the global fade time to 1.35 seconds for upward fading channels and 7.2 seconds for downward
fading channels.
Channel 1>10 Time 5 At 50
Selects channels 1 thru 10, then sets the fade time to 5 seconds, then sets the channels to 50%.
Playback 1 Time 3.5 At 25
Selects playback 1, then sets the fade time to 3.5 seconds, then sets the playback's submaster to 25%.
See Also
• Cue, Fade, Go
CueServer 2 User's Manual - 18.5.18
will cause the fade to delay
Time 5.5-10
Time 1-2/3-4
would
Page 248 of 429