Update Stream - Interactive Technologies CueServer 2 User Manual

Interactive Technologies, Inc.

Update Stream

Syntax
Command
Update [options] Stream <cue number>
•
<cue number>
◦ Any whole number from
◦ May optionally contain decimal numbers from
•
[options]
◦
Channel n
recording and return to zero to stop recording
◦ causes the stream recording to automatically stop after t seconds
Time t
◦
Stack s
Abbreviation
[
UP C n, T t, STA s
Description
Updating Streaming Cues
The Update Stream command begins recording (or re-recording) a streaming cue. As soon as this
command is executed, a stream recording of the CueServer's DMX output will begin. Use the Record Stop
command to stop recording the stream. Use this command to change the DMX stream stored in a cue
without loosing any of the other properties recorded in the cue (such as the follow time, link, and automation
rules).
If no streaming cue with the cue number exists, a new streaming cue will be created. If a streaming cue with
the cue number already exists, only the cue's DMX channels will be re-recorded by using this command. All
other cue parameters will not be affected.
to
0 99999
causes the stream updating to wait for Channel n to become non-zero before
record into Stack s
]
STR
Description
Updates streaming cue cue
number
to
.00 .99
CueServer 2 User's Manual - 18.5.18
Return Value
The cue number
updated
Page 259 of 429