System Log - Interactive Technologies CueServer 2 User Manual

Interactive Technologies, Inc. CueServer 2 User's Manual - 18.5.18

System Log

The System Log shows internal system messages posted by CueServer's operating system and related
software.
Most messages in the System Log are only useful for diagnosing problems, however other informational
messages can appear in the System Log as well.
For instance, the System Log shows each time the system is rebooted.
Also, user-defined messages can be added to the System Log by using the Log CueScript command.
When a message is added to the System Log that indicates a serious condition, the Power LED will begin to
blink. This is called the "Message Indicator". It means that the System Log contains an important message.
To clear this indication, click on the "Clear Message Indicator" button.
If a new important message is currently showing, a warning icon ( ) will appear next to the System Log
line in the status list.
Page 47 of 429