Smpte - Interactive Technologies CueServer 2 User Manual

Interactive Technologies, Inc.

SMPTE

Syntax
Command
SMPTE Start
SMPTE Stop
SMPTE Clear
SMPTE "<timecode>"
SMPTE <frame-number>
SMPTE [+/-]<frames>
SMPTE Input <source>
•
<timecode>
◦ A string value representing a timecode, such as "23:59:59:29".
◦ Fewer places can be specified, for example "1:23", which will be right-justified into a timecode
of "00:00:01:23".
•
<frame-number>
◦ A number of frames since "time zero".
•
<source>
◦ The source of the SMPTE time. May be one of the following:
▪ or
0
▪ or
1
Abbreviation
SMPTE STA, SMPTE STO,
Description
The SMPTE command can be used to manage timecode, including the internal timecode generator, and
external timecode input.
Description
Begins generating internal timecode
Stops generating internal timecode
Sets the current timecode to
Sets the current timecode to the specified time
Sets the current timecode to the specified frame number
Increments or decrements the current frame
Changes the SMPTE input source
to set to Internal Generation.
"Internal"
to set to Audio Input.
"Audio"
CL, or
SMPTE SMPTE IN
CueServer 2 User's Manual - 18.5.18
00:00:00:00
Return Value
1
0
0
0
0
0
0
Page 240 of 429