Interactive Technologies CueServer 2 User Manual page 189

Interactive Technologies, Inc.
Working With Cue Stacks
By default, all cues are loaded from the main cue list. Additionally, the show file may contain one or more
cue stacks. The Stack
stack has been changed on a playback fader, all cues on that playback will be loaded from that cue stack.
Determining The Current Cue
Use the Cue command with the question mark (?) to return the current cue number of the active playback
fader. For instance, if playback 3 currently executing cue 7, then executing the commands
Playback 3 Cue ?
If a playback isn't loaded with a cue, the return value will be negative (less than zero).
Examples
Cue 1
Sets cue 1 as the next cue in the active playback fader.
Cue 7 Go
Executes cue 7 in the active playback fader by first loading cue 7 then executing it.
Playback 3 Cue 100.5 Go
Executes cue 100.5 in playback 3.
Cue 999.99 Fade 5 Go
Loads cue 999.99, then overrides the fade time to 5 seconds, then executes it.
Playback 5
Stack "Intro"
Cue 1 Go
Sets playback 5 as the active playback, then switches the playback to use the stack named "Intro", then
executes Cue 1 from the "Intro" stack.
See Also
• Fade, Follow, Go, Link, Playback,
command is used to change which cue stack the playback fader is using. Once the
will return 7.
Stack
CueServer 2 User's Manual - 18.5.18
Page 187 of 429