Update Group - Interactive Technologies CueServer 2 User Manual

Interactive Technologies, Inc.

Update Group

Syntax
Command
Update Group <group number>
•
<group number>
◦ Any whole number from
Abbreviation
or
UP U UP GR
Description
The Update Group command updates the channels in a group to the currently selected channels.
If no group with the group number exists, a new group will be created. Use this command to change the
DMX channels stored in a group without loosing any of the other properties recorded in the group (such as
the name).
If no group with the group number exists, a new group will be created. If a group with the group number
already exists, only the group's channels will be updated by using this command. All other group parameters
will not be affected.
Examples
Update Group 1
Stores (updates) the currently selected channels into Group 1.
Channel 1>10
Update Group 2
Stores (updates) Channels 1 through 10 into Group 2.
Description
Updates group group number The group number updated
to
0 99999
CueServer 2 User's Manual - 18.5.18
Return Value
Page 257 of 429