Station Options; 900: Startup Preset; 901: Wireless Pin; 902: Grandmaster Enable - Interactive Technologies SceneStation User Manual

Station Options

There are several global station options that can be modified to customize the operation of the
station.
To change one of the following options, press:
EDIT + OPTION + (three-digit option number)
The listings below describe each of the available options in detail.

900: Startup Preset

When a SceneStation is powered on, it can automatically activate a preset.
When editing this option, enter the two-digit preset number you want the station to activate upon
receiving power.
To disable this feature, enter preset number "00".

901: Wireless PIN

Stations that have the optional 2.4 GHz wireless option can use a four-digit PIN number for added
security. If enabled, this PIN number is required to access the station's programming from the
SceneStation Studio software and also for allowing stations to remotely activate presets on other
stations.
When editing this option, enter the four-digit PIN number you want to assign to the station.
All stations part of the same wireless group must have the same PIN number.
To remove the PIN number, enter "0000".

902: Grandmaster Enable

The Grandmaster feature of the station can be enabled or disabled by this setting.
To enable the Grandmaster, enter "1".
To disable the Grandmaster, enter "0".

903: Lock Buttons

The Lock Buttons during DMX Input feature can be enabled or disabled and the color to be
displayed on the station while locked can be adjusted by this setting.
After entering the 903 code, the station will display the selected color of the Lock Buttons func-
SceneStation Installation and Programming Guide Using the Programmer's Remote | 63