Output - Interactive Technologies CueServer 2 User Manual

Interactive Technologies, Inc.

Output

Syntax
Command
Output <number> [<range...>]
Output <station>.<number> [<range...>]
Output ?
Abbreviation
O
Description
Selecting Outputs
The Output command selects one or more outputs in the system. Outputs are typically the hard-wired digital
outputs on a CueServer or external I/O board. Use the Output command in conjunction with an action
command like On, Off, or
expressions, the Output command returns the current state of the specified output(s).
Either a single output number can be specified, or a range of outputs can be specified using the various
selection operators like +, -, > and ~.
The wildcard character
Working With Stations
When no station number specified, the default station is assumed. The
change the default station. Unless changed by the
0, which corresponds to the built-in outputs on the CueServer itself. When a station number is specified as
part of the Output command, that station number will be used for the selection.
At to change the output state of one or more outputs. When used alone or in logic
can be used as the output number to mean all outputs for a particular station.
*
Description
Select one or more outputs
Select one or more outputs on a
specific station
Return the current selection
Station
Station command, the default station is typically Station
CueServer 2 User's Manual - 18.5.18
Return Value
The state of the
selected output(s)
The state of the
selected output(s)
A selection string
command can be used to
Page 162 of 429