Release V1.4.2 [March 17, 2016] - Interactive Technologies CueServer 2 User Manual

Interactive Technologies, Inc.

Release v1.4.2 [March 17, 2016]

Version 1.4.2 (3/17/2016)
• CueServer Studio 2
◦ Added a new Diagnostic Tools section to the Help menu. Two network analysis tools
Feature
have been added:
▪ sACN Network Monitor – Scans the network for active universes of sACN data. Shows
the sources of sACN data on a particular network. Visualizes a chosen sACN source by
showing the channel values as bar graphs or RGB pixels.
▪ CueStation Network Monitor – Monitors and captures any CueStation button and/or
indicator commands found on the network. Displays (or filters) each event based on event
type, source, station or button.
◦ When switching to the Stage or Playback views, the command line is now always
Feature
active.
◦ KiNET v2 now allows each port to be assigned it's own separate IP Address.
Feature
◦ Addressed a problem that caused a crash when changing the number of buttons on a
Bug
station while editing an offline show file.
◦ Addressed a problem that occurred when renaming the active show file, or a show with an
Bug
open editor window.
◦ Changed the behavior of the Network Settings window to automatically adjust the
Feature
gateway field when changing the IP Address and/or Subnet Mask to guarantee that the chosen
gateway would always be reachable on the network.
◦ Addressed a problem with the System Log view on Retina displays that caused the text to
Bug
appear very small.
◦ Addressed a problem that caused the Navigator Window to not become frontmost when
Bug
right-clicking on the Device or Project lists [OS X Only].
• Firmware
◦ Added an update routine that periodically refreshes indictor values in case a CueStation
Feature
Hub misses update messages or is power cycled.
◦ Addressed a problem with CueStation Hub communications that occurred when setting
Bug
many indicator values at once that could cause some indicators to not properly change value.
◦ The WRITE command now processes embedded C-style escape characters in the
Feature
string.
◦ Changed the KiNET v2 driver to support separate IP Addresses for each port.
Feature
CueServer 2 User's Manual - 18.5.18
Page 390 of 429