Release V1.4.0 [January 21, 2016] - Interactive Technologies CueServer 2 User Manual

Interactive Technologies, Inc.

Release v1.4.0 [January 21, 2016]

Version 1.4.0 (1/21/2016)
• CueServer Studio 2
◦ Added ability to set the Input/Output direction of DMX Ports in the DMX Port Settings
Feature
panel.
◦ Added a new Network Settings window that allows the network mode to be switched
Feature
between Single and Dual LAN configurations (on hardware that supports this).
◦ Added preferred CueServer model selection to DMX Port Settings panel (used to show
Feature
the appropriate DMX port options).
◦ Added a warning to the DMX Resources Settings panel when the allocated number of
Feature
universes exceeds the licensed number of universes.
◦ Added warnings to the DMX Port Settings panel when the port direction or universe
Feature
number is questionable.
◦ Added ability to duplicate Cues, Groups, Macros, Timers, and Rules using the list's
Feature
settings menu or contextual menu.
◦ Added a warning icon that shows when a local CueServer is discovered but is not
Feature
accessible on the network because it is on a different subnet.
◦ Added the ability to specify what ranges of DMX channels are broadcast to each port of
Feature
a KiNET v2 device.
◦ CueServer devices now show "A" or "B" after their IP Address if the device has
Feature
Dual-LANs enabled to indicate which LAN the device is connected via.
◦ The Macro editor now fills the available window space with the script editor.
Feature
◦ The "create new show" dialog window now opens with the text field selected.
Feature
◦ Added buttons to the System Log panel that will add marks or text to the log file.
Feature
◦ Show files in the Navigator Window are now listed in alphabetical order.
Feature
◦ Devices that go offline in the Navigator Window now collapse their show listing, loose
Feature
their hierarchical control and cannot be edited.
◦ CueServer 1 models now appear in the device list in gray text.
Feature
◦ Opening a CueServer 1 model now provides a warning that CueServer Studio 2 cannot
Feature
edit older CueServer models.
◦ The Device and Project lists are now sorted by name by default.
Feature
◦ Improved the Show Network Info window to display if the Internet is reachable from the
Feature
local machine.
◦ New shows files now default to not transmitting or receiving DMX over Ethernet.
Feature
CueServer 2 User's Manual - 18.5.18
Page 393 of 429