Interactive Technologies CueServer 2 User Manual page 183

Interactive Technologies, Inc. CueServer 2 User's Manual - 18.5.18
Recalling Values From A Playback
Using the At Playback command allows the channels from a given Playback to be used to set the currently
selected channel values (instead of specifying a single fixed value). This is useful to copy components of a
scene from one playback fader to another.
Pulling Values From the DMX Input
Using the At Input command allows the channels from the DMX Input to be used to set the currently
selected channel values (instead of specifying a single fixed value). This is useful to copy (or snapshot) the
DMX Input into a playback fader.
Pulling Values From the DMX Output
Using the At Output command allows the channels from the DMX Output to be used to set the currently
selected channel values (instead of specifying a single fixed value). This is useful to copy (or snapshot) the
DMX Output into a playback fader.
Using Delta Values
Using the At +/- command allows channels to be set to an offset (or delta) from their current value(s). This
is useful if the current channel value is not known and an offset value need to be added or subtracted from
the current value. For example, an offset can be used to bump a channel value up or down using commands
such as or
Channel 1 At +5 Group 7 At -25.
Setting Indicators
Using the At command with buttons will turn a button's LED indicator on or off. Use or to turn an
At 0 OFF
indicator off. Use or to turn an indicator on. Values of 1, 2, 3, and will set an indicator
At FL, At 100 ON 4
to one of the "user colors".
Setting Outputs
Using the At command with outputs will turn an output on or off. Use or to turn an output off. Use
At 0 OFF
or to turn an output on.
At FL, At 100 ON
Page 181 of 429