Link - Interactive Technologies CueServer 2 User Manual

Interactive Technologies, Inc.

Link

Syntax
Command
Link <cue number>
Link Clear
Link ?
•
<cue number>
◦ Any whole number from
◦ May optionally contain decimal numbers from
Abbreviation
L
Description
Setting The Linked Cue
Use the Link command to set the linked cue for the active playback fader. Whenever a Go occurs, this link
is used to override the normal sequential execution of cues. If no link is set, cues execute in numerical
order. If the link is set to a cue, then this cue will become the next cue after the Go.
Clearing The Linked Cue
Use the Link Clear command to clear any linked cue in the active playback fader. Without a linked cue,
future Go commands will execute cues in numerical order.
Determining The Current Linked Cue
Use the Link command with the question mark (?) to return the current linked cue. A cue number such as
or will be returned. If no cue is linked,
100.5
Description
Sets the active playback fader's linked cue number
Clears the active playback fader's linked cue
Returns the current linked cue of the active playback fader The current linked cue
to
0 99999
-1
to
.00 .99
is returned.
CueServer 2 User's Manual - 18.5.18
Return Value
The linked cue
None
Page 204 of 429
1