Contact - Interactive Technologies CueServer 2 User Manual

Interactive Technologies, Inc.

Contact

Syntax
Command
Contact <number> [<range...>]
Contact <station>.<number> [<range...>]
Contact ?
Abbreviation
CO
Description
Selecting Contacts
The Contact command selects one or more contacts in the system. Contacts are typically the hard-wired
contact closure inputs on a CueServer or external I/O board. Use the Contact command in conjunction with
an action command like
logic expressions, the Contact command returns the current state of the specified contact(s).
Either a single contact number can be specified, or a range of contacts can be specified using the various
selection operators like +, -, > and ~.
The wildcard character
Working With Stations
When no station number specified, the default station is assumed. The
change the default station. Unless changed by the
0, which corresponds to the built-in contacts on the CueServer itself. When a station number is specified as
part of the Contact command, that station number will be used for the selection.
Enable or Disable to change the enabled state of contacts. When used alone or in
can be used as the contact number to mean all contacts for a particular station.
*
Description
Select one or more contacts
Select one or more contacts
on a specific station
Return the current selection
Station
Station command, the default station is typically Station
CueServer 2 User's Manual - 18.5.18
Return Value
The closed state of the
selected contact(s)
The closed state of the
selected contact(s)
A selection string
command can be used to
Page 155 of 429