Toggle - Interactive Technologies CueServer 2 User Manual

Interactive Technologies, Inc.

Toggle

Syntax
Command Description
Toggles the value of the selected object(s) The value the object(s) were set to
Toggle <value>
•
<value>
◦ A percentage from
by the sign.
%
◦ A decimal number from
proceeded with a
◦ A hexadecimal number from
must be proceeded with a
◦ (Full) or
FL
◦ can be used as a shortcut that means
Off
Abbreviation
TOG
Description
Toggling Values
The Toggle command flip-flops the currently selected object(s) values between a fixed value and zero. In
other words, if the selected value is already set to the toggle value, the value is set to zero. But, if the
selected value is not equal to the toggle value, then the value is set to the toggle value. This flip-flop
behavior creates a situation where each time the Toggle command is executed, the selected value(s)
alternate between zero and the toggle value.
The Toggle command can be used with many types of objects, including Buttons, Channels, Groups,
Outputs, and Playbacks.
Other than the alternating behavior, the Toggle command otherwise behaves similarly to the
to 100. When specifying percentages, the value can optionally be followed
0
to #255. When specifying decimal numbers, the value must be
#0
sign.
#
to $FF. When specifying hexadecimal numbers, the value
$00
sign.
$
can be used as a shortcut that means
On
Return Value
100%
0%
CueServer 2 User's Manual - 18.5.18
At command.
Page 249 of 429