Table of Contents
Advertisement
tion (if set) or the display will be all black if not set.
Use the Up, Down, Right and Left buttons to choose a color and intensity for the Lock Buttons
function. Then, press Enter to store the color and enable the feature.
To disable the feature, press Clear and then press Enter.
904: Deselect Preset
The Deselect Preset during DMX Input feature can be enabled or disabled by this setting:
To enable the Deselect Preset function, press "1".
To disable the Deselect Preset function, press "0".
905: DMX Output Restore
The action taken when the station's DMX Output is restored is chosen using this setting:
To have the station Fade to Black, enter "00".
To have the station Activate a Preset, enter the two-digit preset number of the desired preset, for
example "07".
To have the station Snap to the Current Preset, enter "97".
To have the station Fade to the Current Preset, enter "98".
To have the station Hold the Last Scene from the external console, enter "99".
906: Front-Panel Auto-Dim
The level of ambient light that will auto-dim the front-panel buttons:
To disable this feature, enter "0".
To set the auto-dim level to "Low Ambient Light", enter "1".
To set the auto-dim level to "Medium Ambient Light", enter "2".
To set the auto-dim level to "High Ambient Light", enter "3".
961: Display Firmware Version
When selected, this option displays the station's Firmware Version using the LED indicators on
each of the buttons.
See the Determining Firmware Version appendix for details.
64 | Using the Programmer's Remote
SceneStation Installation and Programming Guide
Advertisement
Table of Contents
Need help?
Do you have a question about the SceneStation and is the answer not in the manual?