Chapter 8 Wt210/Wt230 Compatible Commands; Wt210/Wt230 Compatible Command Mode - YOKOGAWA WT310EH User Manual

Chapter 8 WT210/WT230 Compatible Commands
8.1

WT210/WT230 Compatible Command Mode

Procedure
Follow the procedure indicated by the thick lines in the following menu.
Select the command mode.
1.
Explanation
Many of the functions of this instrument can be controlled with the legacy model WT210/WT230
communication commands. For these functions, WT210/WT230 communication programs can be
used on this instrument.
Command Mode
• WT300E: C ommand mode in which communication commands of this instrument are used
• WT300: C ommand mode in which the commands are compatible with WT310/WT310HC/WT332/
All other commands are the same as when the command mode is set to WT300E.
• WT200: C ommand mode in which the commands are compatible with WT210/WT230
Compatibility with WT210/WT230 communication commands is as follows:
Symbols used in tables
• A: Compatible
• B: Partial limitation
• C: Command accepted but does not work
• D: Command not accepted
Note
For details on WT210/WT230 communication commands, see the WT210/WT230 User's Manual.
AOUTput Group
Function
D/A output item (during normal
measurement)
Sets or queries the rated
integration time.
Resets settings to their
defaults.
IM WT310E-17EN
(Display B)
2.
3
.
These commands are not compatible with WT210/WT230 communication commands.
WT333 communication commands. The responses to the *IDN? and :SYSTem:SUFFix?
commands will be those of the WT310/WT310HC/WT332/WT333.
communication commands.
WT210/WT230 Command
AOUTput:CHANnel<x>
<x> =
1 to 12 (for /DA12)
1 to 4 (for /DA4, /CMP)
:AOUTput:IRTime
:AOUTput:PRESet
5.
(Display D)
4.
Set, close menu.
Command of This Instrument
Command Mode: WT200
A
B Cannot be set with a string. B
A
Command Mode: WT300, WT300E
B NONE = No output item
<Function> = {U|I|P|S|Q|LA
MBda|PHI|FU|FI|WH|WHP|WH
M|AH|AHP|AHM|MATH|UPeak|
IPeak}
<Element> = {<NRf>|SIGMa}
(<NRf> = 1 to 3)
Cannot be set with a string.
A
1
2
3
4
5
6
7
8
9
App
Index
8-1