YOKOGAWA WT310EH User Manual page 32

Note
Only use one communication interface: USB, GP-IB, RS-232, or Ethernet. If you send commands
simultaneously from more than one communication interface, this instrument will not execute the commands
properly.
You can view the IP address that has been assigned by the DHCP server or the IP address that you
specified by following the procedure below.
Select the
communication function.
1.
2.
Explanation
Configuring the TCP/IP Settings
To use the Ethernet interface, you must specify TCP/IP settings.
DHCP
DHCP is a protocol that temporarily allocates necessary information to a device so that it can
connect to the Internet.
ON
If you are connecting this instrument to a network with a DHCP server, you can turn on the DHCP
setting. If you do, the IP address will be automatically assigned to this instrument when it is
connected to the network, so you do not have to set the address.
OFF
If you set DHCP to OFF, set the appropriate IP address, subnet mask, and default gateway for your
network.
IP Address, Subnet Mask, and Default Gateway
The IP address, subnet mask, and default gateway appear in the following positions on the displays
of this instrument.
IP address display example
IP address: 192 . 168 .
Applying the Settings
The TCP/IP settings are applied when:
• You select EXEC on the Bind menu and press SET.
• You restart this instrument.
IM WT310E-17EN
4.4 Configuring the Ethernet Settings of This Instrument
(Display B)
or
Displays C and D
show the IP address.
0. 100
3.
Close menu.
1
2
3
4
5
6
7
8
9
App
Index
4-5