Configuring The Usb Settings Of This Instrument - YOKOGAWA WT310EH User Manual

1.4 Configuring the USB Settings of This
Instrument
This section explains the following setting for controlling this instrument remotely through a USB
interface:
Procedure
Follow the procedure indicated by the thick lines in the following menu.
• Viewing the serial number that is used in USB TMC communications
Select the
communication function.
1.
Note
• Only use one communication interface: USB, GP-IB, RS-232, or Ethernet. If you send commands
simultaneously from more than one communication interface, this instrument will not execute the
commands properly.
• Install the YOKOGAWA USB TMC (Test and Measurement Class) driver on your PC. For information
about how to obtain the YOKOGAWA USB TMC driver, contact your nearest YOKOGAWA dealer. You can
also access the YOKOGAWA USB driver download web page and download the driver.
http://tmi.yokogawa.com/
• Do not use USB TMC drivers (or software) supplied by other companies.
1-4
(Display B)
or
2.
Instrument number
is shown in displays
C and D.
3.
Close menu.
IM WT310E-17EN