YOKOGAWA WT310EH User Manual page 87

Function
Queries the communication
output setting of the specified
normal measurement function.
Sets the communication output
on/off state of the specified normal
measurement function on all valid
elements or Σ at once.
Sets or queries the
communication output on/off
state of the specified normal
measurement function on the
specified element.
Sets or queries the
communication output on/off
state of the specified normal
measurement function on Σ.
Sets or queries the
communication output on/off
state of {elapsed integration
time|MATH}.
Queries the normal
measurement data that has
been set with commands
that start with "MEASure[:
NORMal]:ITEM."
RECall Group
Function
Sets or queries the recall
interval.
Loads a setup parameter file. :RECall:PANel
Sets or queries the recall
on/off state.
RELay Group
Function
Sets or queries the comparator
function.
SAMPle Group
Function
Sets or queries the output data
(display, communication, etc.)
hold state.
Sets or queries the data
update interval.
IM WT310E-17EN
WT210/WT230 Command
:MEASure[:NORMal]:
ITEM:<normal measurement
function>?
:MEASure[:NORMal]:
ITEM:<normal measurement
function>[:ALL]
:MEASure[:NORMal]:
ITEM:<normal measurement
function>:ELEMent<x>
:MEASure[:NORMal]:
ITEM:<normal measurement
function>:SIGMa
:MEASure[:NORMal]:
ITEM:{TIME|MATH}
:MEASure[:NORMal]:VALue?
:MEASure[:NORMal]:BINary?
WT210/WT230 Command
:RECall:INTerval
:RECall[:STATe]
WT210/WT230 Command
:RELay:...
WT210/WT230 Command
:SAMPle:HOLD
:SAMPle:RATE
8.1 WT210/WT230 Compatible Mode
Command of This Instrument
Command Mode: WT200
A
A
A
A
A
A
Command of This Instrument
Command Mode: WT200
D The function for recalling
to the screen of this
instrument is not available.
A
D The function for recalling
to the screen of this
instrument is not available.
Command of This Instrument
Command Mode: WT200
No comparator function
D
Command of This Instrument
Command Mode: WT200
A
A
Command Mode: WT300, WT300E
D :NUMeric:NORMal?
D :NUMeric[:NORMal]:ITEM<x>
D
D
D
D (1) :NUMeric:FORMat
{ASCii|FLOat}
(2) :NUMeric[:NORMal]:
VALue?
Command Mode: WT300, WT300E
D
A
D
Command Mode: WT300, WT300E
D
Command Mode: WT300, WT300E
:HOLD
A
:RATE
A
1
2
3
4
5
6
7
8
9
App
Index
8-5