Alarm; Replacing The Battery - EDAN M3 User Manual

M3 Vital Signs Monitor User Manual

10.2.3 Alarm

The alarm limits are as follows:
Patient Type
ADU/PED/NEO
Physiological alarms:
Message
TEMP HIGH
TEMP LOW
Technical alarms:
Message
Temp exceed
limit
The infrared ear thermometer will also give error messages on its screen. For details about the
error messages, refer to the accompanying operating instructions of the thermometer.
NOTE:
If the infrared ear thermometer frequently signals ERR alarms, the insulated board inside
the thermometer housing is malfunctioning or the ambient temperature changes, the
monitor will delete the measurement values onscreen to avoid misoperation.

10.2.4 Replacing the Battery

The device is supplied with one lithium cell CR2032x1.
To replacing the battery, follow the procedure:
1. Open the battery cover by inserting a pointed object into the battery cover pin hole;
meanwhile, use thumb to push battery cover out.
Measure
position
+42 ℃ (+107.6
Ear
Measuring value of TEMP is above upper alarm limit.
Measuring value of TEMP is below lower alarm limit.
Cause
The TEMP value is
beyond the range of
℃ ℃
+34 ~ +4 2.2 .
ALM HI
℉ +35.5 ℃ (+95.9
)
Cause
Alarm Level
Check the integrity of the
probe cover, make sure it is
Med
clean,
measurement.
- 88 -
TEMP Monitoring (Optional)
ALM LO
℉ +0.1 ℃
)
Alarm Level
Med
Med
What to do
and take a
Step
new