EDAN M3 User Manual page 44

M3 Vital Signs Monitor User Manual
COLOR SELECT: Set the color of displayed waveforms. 16 kinds of colors can be selected.
Click on DEFAULT to return to the default configuration.
OTHER SETUP
SpO SETUP:
2
Access SpO SETUP and you can see the menu below:
2
SpO ALARM LEV
2
You can configure the alarm level for SpO
SENSITIVITY
The SpO reading is the average of data collected within a specific time. You can set
2
Sensitivity to HIGH, MED or LOW via the menu. The higher the sensitivity is, the quicker
the pulse oximeter responds to the changes in the patient's oxygen saturation level.
Contrarily, the lower the sensitivity is, the slower the pulse oximeter responds to the changes
in the patient's oxygen saturation level, but the measurement accuracy will be improved.
When a critical patient is monitored, selecting high sensitivity will help to understand the
patient's state.
Figure 4-22 Color Select
Figure 4-23 SpO Setup
2
SENSOR OFF to HIGH or LOW.
2
- 38 -
System Menu