EDAN M3 User Manual page 87

M3 Vital Signs Monitor User Manual
ALM: pick ON to enable prompt message during the TEMP alarm; pick OFF to disable the
alarm function, and display the
In order to avoid endangering the patient's life, the user should use this function
cautiously.
Set ALM HI for the higher alarm limit, and set ALM LO for the lower alarm limit.
In PREDICT mode, if measured value is higher than ALM HI, the monitor will give alarm and
display icon in TEMP parameter area:
monitor will give alarm and display icon
During the measuring, the following icon is always displayed in TEMP parameter area:
Figure 10-4 Alarm Setup Menu
symbol besides TEMP numeric.
WARNING
. If measured value is lower than ALM LO, the
- 81 -
TEMP Monitoring (Optional)
.