Connecting Sensor To Patient; Checking The Recorder - EDAN M3 User Manual

M3 Vital Signs Monitor User Manual
NOTE:
1 Check all the functions of the monitor and make sure that the monitor is in good
condition.
2 If rechargeable batteries are provided, recharge them after using the monitor every
time to ensure the electric power is enough.
3 The interval between double presses of ON/OFF button should be more than 1
second.
4 After continuous 7 days (168 hours) runtime, please restart the monitor to ensure the
monitor's steady performance and long lifespan.

2.4 Connecting Sensor to Patient

Connect all the necessary patient sensors between the monitor and the patient.
NOTE:
For information on correct connection, refer to related chapters.

2.5 Checking the Recorder

If your monitor is equipped with a recorder, open the recorder door to check if paper is properly
installed in the slot. If no paper is present, refer to Chapter 6 Trend and Recording for details.
- 8 -
Installation of Monitor