EDAN M3 User Manual page 96

M3 Vital Signs Monitor User Manual
Please send the complete device to the dealers or nearest service address. However, if
this device is used according to the operation instructions, periodic re-calibration is not
required.
Cleaning
The probe is the most delicate part of the thermometer. Use it with care when cleaning the lens to
avoid damage.
If the device is accidentally used without a probe cover, clean the probe as follows:
1. After the measurement, use the cotton swab moistened with alcohol (70% concentration) to
clean the lens (on the inside of the probe).
2. Allow the probe to fully dry for at least one minute.
- 90 -
TEMP Monitoring (Optional)