EDAN M3 User Manual page 49

M3 Vital Signs Monitor User Manual
ON/OFF: set the Data Store function to ON or OFF.
1 If you want to stop the data storing function, you should set this item to OFF before
unplugging the USB disk.
2 Do not unplug the USB storage when storing data. If the data damaged by
unplugging the USB storage during data storing can not be deleted on the monitor,
the user can delete them on the PC.
NOTE:
If you set the item to ON, after restarting the monitor, this item will resume OFF
automatically.
INTERVAL: set the storing interval by this item, it can be set to 1S, 5S, 10S, 30S, 1MIN or
5MIN.
MANAGEMENT: select BROWSE to browse data stored before.
Figure 4-27 Data Store
WARNING
- 43 -
System Menu