Sleep Mode - EDAN M3 User Manual

M3 Vital Signs Monitor User Manual
2 The data which is being stored can not be browsed in real time. Before searching
data, you should turn off the Data Store function at first.

4.13 Sleep Mode

Entering the Sleep Mode
Select SYSTEM MENU >SYSTEM SETUP >STANDBY and configure the item to ON. Then
you will see the following dialoge box after pressing the switch for less than 1s:
Select YES to enter the Sleep mode.
NOTE:
When the SYSTEM SETUP >STANDBY is OFF, or the monitor is in DEMO mode, or
there is any inputting signal, pressing the ON/OFF button can not make the monitor enter
the sleep mode.
Quitting the Sleep Mode
In the sleep mode, if a new signal occurs or you press any button on the front panel, the monitor
will enter the working mode.
NOTE:
1 If the following situation occurs, monitor will return to normal monitoring mode
automatically: The monitor receives physiological signal of SpO
the monitor is powered by battery, when the battery electric energy is low, it will enter
normal monitoring mode, and indicates low battery alarm.
2 In DEMO mode, the monitor can not enter Sleep mode.
Figure 4-33 Enter Sleep Mode
- 46 -
System Menu
, and lasts for 5s; If
2